Design of a Centerline Method Tailings Dam using Mine Waste Rockfill in Perú

Design of a Centerline Method Tailings Dam using Mine Waste Rockfill in Perú

Author: Paul W. Ridlen, Thomas Kerr,  Gilberto Dominquez, Jean-Baptiste Varnier
Conference: Tailings and Mine Waste 2018
Date: September 30-October 2, 2018

ABSTRACT
The Constancia tailings facility, located in the Peruvian Andes, was designed to store more than 450 million tonnes of copper tailings in an area of relatively high seismicity and seasonally high rainfall. The tailings dam, currently more than 100 meters high, is constructed of compacted rockfill sourced from glacial outwash, quarried sandstone, and open-pit waste rock, and will ultimately be raised to a height greater than 170 meters. The dam comprises an initial downstream-method rockfill embankment with sloping upstream core and chimney drain, with subsequent conversion to a centerline-method, supported by an upstream rockfill platform to provide support to the vertical section of core and filter/drain zones. This paper provides a summary of the design analyses and describes observations made during construction and operation. Site-specific deterministic and probabilistic seismic hazard analyses, seep-age, slope stability, and deformation analyses performed to predict the long-term engineering behavior of the dam and impounded tailings are described.

 

Download the full technical paper.

Download

 

Recent Insights

February 2024
Empowerment and Resilience
January 2024
Balancing Act: Water Usage Management Vital for a Sustainable Future
January 2024
A Difficult Balance Between Engineering, Environmental, Social and Economic Aspects
November 2023
Knight Piésold Commences with the ESIA for Haib Copper
November 2023
Insights from the Compilation and Critical Assessment of Breach and Runout Characteristics from Historical Tailings Dam Failures: Implications for Numerical Modelling
November 2023
Earthquake-induced Deformation Analysis of a TSF Undergoing Tailings Reprocessing
November 2023
Case Study: Approach to Determining the Risk Mitigation Priority of a Historic TSF in North America
October 2023
Data Management and Insights for Effective Tailings Storage Facility Management
October 2023
The Role of Sensitivity Analysis in Selecting Dam Breach Parameters
October 2023
Influence of Increased Confining Stress on Undrained Behavior of Tailings: A Case History at the Candelaria Mine
October 2023
The Re-use of Existing Bituminous Stabilised Materials for the Rehabilitation of National Route 7 - Case Study
September 2023
Transición energética para gerentes de mina
August 2023
Interview: Guillermo Barreda, Gerente General, Knight Piésold Perú
July 2023
Selection of Soil Shear Strength Parameters Based on Integrated In Situ Tests, Lab Tests and Numerical Calibration Approach
June 2023
Leveraging Knowledge and Experience of a Well-Formed Independent Tailings Review Board to Enhance Tailings Facility Safety
May 2023
Is the Implementation of Dry Stacking for Tailings Storage Increasing? A Southern African Perspective
February 2023
Canadian Consulting Engineer's Lifetime Achievement Awards: Jeremy Haile
February 2023
Geotechnical Characterization of Collapsible Salty Sands Subjected to Monotonic and Cyclic Loadings – A Case Study for Areas with High Seismicity
November 2022
Application of the 3D Limit Equilibrium Method in Tailings Dam Breach Analysis
November 2022
Evaluation of Tailings Behaviour for Dam Breach Assessments